> DE
The picture shows the CO2 laser workplace from above.

Research Area

Analytics – Materials – Composites

Infrared Laser (CO2-Laser)

The CO2 laser from the company SLCR is a continuously working CO2-CW laser, which emits the laser radiation in the form of a continuous beam. The primary wavelength of 10.6µm is absorbed by organic materials to approx. 90-99.9%, but is rather reflected by metals. In this power class it is therefore very well suited for processing plastics. These can be structured, labeled or removed. With the corresponding parameters, it is to be used at Innovent for work on structuring and activation of plastics, thus opening up new fields of application.

The picture shows the CO2 laser workstation from the front. You can see the laser with scanner head, the height adjustment and a small lifting table for the samples. An emergency switch and warning lights are mounted.
CO2-Laser workplace
Device Configuration
Laser type: CO2-CW Laser
Wavelength:10,6 µm
Power:15 - 100 W
Focus diameter: 290 / 540 µm
Beam profile:Gaussian
Working field size: 110 × 110 / 198 x 198 mm
Scan speed:  max. 7620 mm/s

 

Due to the computer-controlled 2D scan head a good spatial resolution is possible. Depending on the selected objective, this is in the range of the focus diameter. The smallest possible image is a point of about 290 µm.

 

In the video different plastics and ceramics are lasered. Depending on the material, the visual effect and the result is different.
The picture shows different laser processed materials. The laser radiation creates different colored effects on the materials.
various laser processed materials
A Picture of the local exhaust ventilation for potentially harmful gases on the laser workplace is presented.
A warning light at the entrance to the laser laboratory is shown. The sign laser warns against emitting visible and invisible laser irradiation. Always wear safety glasses.
The picture shows a part of the control box of the CO2-laser workstation. There are many signs with warnings.
The figure shows the control box of the CO2 laser workstation. There is an emergency stop switch, other switches and many warning signs to be seen.
The picture shows the scanner head and the sample lift table of the CO2 laser workstation.
The picture shows different laser processed materials. The laser radiation creates different colored effects on the materials.

further Proceedings of our Irradiation Technology

A textile fabric during the passage through the mercury irradiation unit is shown.
VUV Systems
The picutre shows the laser cleaning of rusty steel to demonstrate the effectiveness of the cleaning process.
Infrared-Laser (Solid-state laser)

Manufacturer:

SLCR GmbH

Model: 

SLCR CO2-CW100